Cart

The hangers that mount to the door have two different designs:

• Face mount: the hangers mount on the face of door where you can see the straps coming down on the door.
• Top Mount: the hangers mount on top of the door.

The hangers that mount to the door have four different designs:

• Face mount: the hangers mount on the face of door where you can see the straps coming down on the door.
• Top Mount: the hangers mount on top of the door.
• Horseshoe: the hangers are in the shape of a horseshoe
• Arrowhead: the hangers are in the shape of an arrowhead

Door guides are already provided in the kit. If you need extra floor guides for other reasons, you can order them here. Floor guides are mounted to the floor and the wall guides are mounted to the baseboards (or wall if you don’t have baseboard).

Lorem ipsum dolor sit amet, quo an meliore nominavi. In modus reprimique vel, eam errem invenire sensibus ex, sit an vituperata omittantur. Ludus soluta vel ad, legere possim quo id, vix vidisse insolens at. Nec illud propriae te.

This handle can only be used on the outside of the door, the side where the track is seen. If you mount this on the inside on the door, you can’t slide the door as it will hit the wall.

Outside pulls made of raw steel and matte black are 1.5” wide as seen in the illustration.

Outside pulls made of brass and stainless steel are 1” wide.

Recessed handles can be used on both sides of the door. For the inside of the door (the other side of the wall where you don’t see the track), make sure you install the handles in a way that when the door is closed, you’ll still have access to the handles. If you’re doing telescopic application, you’ll only need handle(s) for one door.

There are 3 finishes:

• Raw steel
• Matte Black
• Brass: please note that this is not solid brass, it is brass plated, the colour is slightly different from our solid brass barn door hardware, but still goes well together.
• Satin Nickel: we find the Satin Nickel finish goes well with our stainless steel barn door hardware finish.

We predrill the holes symmetrically along the track. The ends holes go in 1” from the end of the track. If you would rather drill your own holes to match with the studs, please chose NO PREDRILL.

Please read the installation instructions for more info.

If your track is over 96” long, it will be shipped as two pieces, and you mount them butt ended. If you’re picking up from our studio, the longest it can be as one piece is 150”. After that, it has to be in two pieces.

Track lengths of 6′ and below are the same price.

You can apply our Single Track Bypass in one of two ways below:

• STANDARD BYPASS: Each door moves independently in front of the opening, allowing access to half of the space at a time. * NOT RECOMMENDED FOR OPENINGS OF LESS THAN 60” WIDE
• TELESCOPIC BYPASS: Both doors move together in a telescoping manner allowing access to full space. Requires wall space to park the doors when opened.

Our Single Track Bypass hardware comes in 5 finishes/design. If you would like white powder coated, please contact us at info@1925workbench.com to request that.

• Raw steel is unfinished raw metal
• Stainless steel
• Solid brass (the only parts not solid brass are the bolts which is brass plated)
• Arrowhead is unfinished raw metal, with hangers in shape of arrowheads
• Matte Black, powder coated matte black

Lorem ipsum dolor sit amet, quo an meliore nominavi. In modus reprimique vel, eam errem invenire sensibus ex, sit an vituperata omittantur. Ludus soluta vel ad, legere possim quo id, vix vidisse insolens at. Nec illud propriae te.

This handle can only be used on the outside of the door, the side that the track is seen. If you mount this on the inside on the door, you can’t slide the door as it will hit the wall.

Outside pulls made of raw steel and matte black are 1.5” wide as seen in the illustration.

Outside pulls made of brass and stainless steel are 1” wide.

Recessed handles can be used on both sides of the door. For the inside of the door (on the side where you don’t see the track), make sure you install the handles in a way that when the door is closed, you’ll still have access to the handles.

There are 3 finishes:

• Raw steel
• Matte Black
• Brass: please note that this is not solid brass, it is brass plated, the colour is slightly different from our solid brass barn door hardware, but still goes well together.
• Satin Nickel: we find the Satin Nickel finish goes well with our stainless steel barn door hardware finish.

Door guides are already provided in the kit for you, if you need extra floor guides for other reasons, you can order them here. Floor guides are mounted to the floor and the wall guides are mounted to the baseboards (or wall if you don’t have baseboard).

We predrill the holes symmetrically along the track. The ends holes go in 1.5” from the end of the track. If you would rather drill your own holes to match with the studs, please chose NO PREDRILL.

The track is usually twice the width of the door. Please read the installation instruction for more info.

We do not ship anything over 96” as one piece, therefore, if the total track length for the bi-part doors is longer than that, it would be in two pieces.

Track lengths of 6′ and below are the same price.

Standard: For one door.

Bi-part: two doors are installed along the same track; the doors slide away from each other to open and slide towards each other in the middle to close. Please note, you can install two separate tracks side by side to create a longer track. For example, if the track you need is 12’, you can use 2x 6’ tracks. We do not ship anything over 105” as one piece, therefore, if the total track length for the bi-part doors is longer than that, it would be in two pieces.